Document Content and Description Below
1. A systems administrator needs to improve WiFi performance in a densely populated office tower and use the latest standard. There is a mix of devices that use 2.4 GHz and 5 GHz.Which of the foll... owing should the systems administrator select to meet this requirement?2. A network administrator is designing a new datacenter in a different region that will need to communicate to the old datacenter with a secure connection.Which of the following access methods would provide the BEST security for this new datacenter?3. Which of the following connector types would have the MOST flexibility?4. Which of the following would be BEST to use to detect a MAC spoofing attack?5. Which of the following technologies provides a failover mechanism for the default gateway?6. A technician is installing a new fiber connection to a network device in a datacenter. The connection from the device to the switch also traverses a patch panel connection.The chain of connections is in the following order:Device ->LC/LC patch cable ->Patch panel ->Cross-connect fiber cable ->Patch panel ->LC/LC patch cable ->Switch ->The connection is not working. The technician has changed both patch cables with known working patch cables. The device had been tested and was working properly before being installed.Which of the following is the MOST likely cause of the issue?7. An IT organization needs to optimize speeds for global content distribution and wants to reduce latency in high-density user locations.Which of the following technologies BEST meets the organization’s requirements?8. A network administrator walks into a datacenter and notices an unknown person is following closely. The administrator stops and directs the person to the security desk.Which of the following attacks did the network administrator prevent?9. A new cabling certification is being requested every time a network technician rebuilds one end of a Cat 6 (vendor-certified) cable to create a crossover connection that is used to connect switches.Which of the following would address this issue by allowing the use of the original cable?10. Which of the following is used to track and document various types of known vulnerabilities?11. A technician needs to configure a Linux computer for network monitoring.The technician has the following information:Linux computer details:••Switch mirror port details:••After connecting the Linux computer to the mirror port on the switch, which of the following commands should the technician run on the Linux computer?12. A network administrator needs to query the NSs for a remote application.Which of the following commands would BEST help the administrator accomplish this task?13. A network technician is reviewing the interface counters on a router interface. The technician is attempting to confirm a cable issue.Given the following information:••Which of the following metrics confirms there is a cabling issue?14. Which of the following transceiver types can support up to 40Gbps?15. Which of the following types of devices can provide content filtering and threat protection, and manage multiple IPSec site-to-site connections?16. The following configuration is applied to a DHCP server connected to a VPN concentrator:There are 300 non-concurrent sales representatives who log in for one hour a day to upload reports, and 252 of these representatives are able to connect to the VPN without any Issues. The remaining sales representatives cannot connect to the VPN over the course of the day.Which of the following can be done to resolve the issue without utilizing additional resources?17. A network device is configured to send critical events to a syslog server; however, the following alerts are not being received:Severity 5 LINK-UPDOWN: Interface 1/1, changed state to downSeverity 5 LINK-UPDOWN: Interface 1/3, changed state to downWhich of the following describes the reason why the events are not being received?18. The network administrator is informed that a user’s email password is frequently hacked by brute-force programs.Which of the following policies should the network administrator implements to BEST mitigate this issue? (Choose two.)19. A technician is connecting multiple switches to create a large network for a new office. The switches are unmanaged Layer 2 switches with multiple connections between each pair. The network is experiencing an extreme amount of latency.Which of the following is MOST likely occurring?20. A network administrator redesigned the positioning of the APs to create adjacent areas of wireless coverage. After project validation, some users still report poor connectivity when their devices maintain an association to a distanced AP.Which of the following should the network administrator check FIRST?21. Several WIFI users are reporting the inability to connect to the network. WLAN users on the guest network are able to access all network resources without any performance issues.The following table summarizes the findings after a site survey of the area in question:Which of the following should a wireless technician do NEXT to troubleshoot this issue?22. A branch of a company recently switched to a new ISP. The network engineer was given a new IP range to assign.The ISP assigned 196.26.4.0/26, and the branch gateway router now has the following configurations on the interface that peers to the ISP:The network engineer observes that all users have lost Internet connectivity.Which of the following describes the issue?23. Which of the following provides redundancy on a file server to ensure the server is still connected to a LAN even in the event of a port failure on a switch?24. A network administrator is configuring a load balancer for two systems.Which of the following must the administrator configure to ensure connectivity during a failover?25. A network administrator is installing a wireless network at a client’s office.Which of the following IEEE 802.11 standards would be BEST to use for multiple simultaneous client access?26. CORRECT TEXTSIMULATIONYou have been tasked with setting up a wireless network in an office. The network will consist of 3 Access Points and a single switch. The network must meet the following parameters:The SSIDs need to be configured as CorpNet with a key of S3cr3t!The wireless signals should not interfere with each otherThe subnet the Access Points and switch are on should only support 30 devices maximumThe Access Points should be configured to only support TKIP clients at a maximum speedINSTRUCTONSClick on the wireless devices and review their information and adjust the settings of the access points to meet the given requirements.If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.27. A user tries to ping 192.168.1.100 from the command prompt on the 192.168.2.101 network but gets the following response: U.U.U.U.Which of the following needs to be configured for these networks to reach each other?28. CORRECT TEXTYou are tasked with verifying the following requirements are met in order to ensure network security.Requirements:DatacenterEnsure network is subnetted to allow all devices to communicate properly while minimizing address space usageProvide a dedicated server to resolve IP addresses and hostnames correctly and handle port 53 trafficBuilding AEnsure network is subnetted to allow all devices to communicate properly while minimizing address space usageProvide devices to support 5 additional different office usersAdd an additional mobile userReplace the Telnet server with a more secure solutionScreened subnetEnsure network is subnetted to allow all devices to communicate properly while minimizing address space usageProvide a server to handle external 80/443 trafficProvide a server to handle port 20/21 trafficINSTRUCTIONSDrag and drop objects onto the appropriate locations. Objects can be used multiple times and not all placeholders need to be filled.Available objects are located in both the Servers and Devices tabs of the Drag & Drop menu.If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.29. A technician wants to deploy a new wireless network that comprises 30 WAPs installed throughout a three-story office building. All the APs will broadcast the same SSID for client access.Which of the following BEST describes this deployment?30. A technician is installing a high-density wireless network and wants to use an available frequency that supports the maximum number of channels to reduce interference.Which of the following standard 802.11 frequency ranges should the technician look for while reviewing WAP specifications?31. Within the realm of network security, Zero Trust:32. Which of the following devices would be used to manage a corporate WLAN?33. A store owner would like to have secure wireless access available for both business equipment and patron use.Which of the following features should be configured to allow different wireless access through the same equipment?34. An engineer notices some late collisions on a half-duplex link. The engineer verifies that the devices on both ends of the connection are configured for half duplex.Which of the following is the MOST likely cause of this issue?35. A technician is troubleshooting a network switch that seems to stop responding to requests intermittently whenever the logging level is set for debugging.Which of the following metrics should the technician check to begin troubleshooting the issue?36. An IT director is setting up new disaster and HA policies for a company. Limited downtime is critical to operations. To meet corporate requirements, the director set up two different datacenters across the country that will stay current on data and applications. In the event of an outage, the company can immediately switch from one datacenter to another.Which of the following does this BEST describe?37. A network engineer is investigating reports of poor network performance. Upon reviewing a report, the engineer finds that jitter at the office is greater than 10ms on the only WAN connection available.Which of the following would be MOST affected by this statistic?38. A technician is assisting a user who cannot connect to a network resource. The technician first checks for a link light.According to troubleshooting methodology, this is an example of:39. Which of the following can be used to centrally manage credentials for various types of administrative privileges on configured network devices?40. A technician is writing documentation regarding a company’s server farm. The technician needs to confirm the server name for all Linux servers.Which of the following commands should the technician run?41. A network technician is manually configuring the network settings for a new device and is told the network block is 192.168.0.0/20.Which of the following subnets should the technician use?42. After the A record of a public website was updated, some visitors were unable to access the website.Which of the following should be adjusted to address the issue?43. A network administrator discovers that users in an adjacent building are connecting to the company’s guest wireless network to download inappropriate material.Which of the following can the administrator do to MOST easily mitigate this issue?44. According to troubleshooting methodology, which of the following should the technician do NEXT after determining the most likely probable cause of an issue?45. A user reports being unable to access network resources after making some changes in the office.Which of the following should a network technician do FIRST?46. An administrator is writing a script to periodically log the IPv6 and MAC addresses of all the devices on a network segment.Which of the following switch features will MOST likely be used to assist with this task?47. Branch users are experiencing issues with videoconferencing.Which of the following will the company MOST likely configure to improve performance for these applications?48. Which of the following systems would MOST likely be found in a screened subnet?49. A network technician is installing new software on a Windows-based server in a different geographical location.Which of the following would be BEST for the technician to use to perform this task?50. A network engineer configured new firewalls with the correct configuration to be deployed to each remote branch. Unneeded services were disabled, and all firewall rules were applied successfully.Which of the following should the network engineer perform NEXT to ensure all the firewalls are hardened successfully?•Ensure an implicit permit rule is enabled•Configure the log settings on the firewalls to the central syslog server•Update the firewalls with current firmware and software correct•Use the same complex passwords on all firewalls51. A technician is troubleshooting a wireless connectivity issue in a small office located in a high-rise building. Several APs are mounted in this office. The users report that the network connections frequently disconnect and reconnect throughout the day.Which of the following is the MOST likely cause of this issue?52. Which of the following routing protocols is used to exchange route information between public autonomous systems?53. Client devices cannot enter a network, and the network administrator determines the DHCP scope is exhausted. The administrator wants to avoid creating a new DHCP pool.Which of the following can the administrator perform to resolve the issue?54. A network is experiencing a number of CRC errors during normal network communication.At which of the following layers of the OSI model will the administrator MOST likely start to troubleshoot?55. Which of the following is the physical topology for an Ethernet LAN?56. A technician is installing multiple UPS units in a major retail store. The technician is required to keep track of all changes to new and old equipment.Which of the following will allow the technician to record these changes?57. Which of the following BEST describes a network appliance that warns of unapproved devices that are accessing the network?58. Access to a datacenter should be individually recorded by a card reader even when multiple employees enter the facility at the same time.Which of the following allows the enforcement of this policy?59. A technician is installing a cable modem in a SOHO.Which of the following cable types will the technician MOST likely use to connect a modem to the ISP?60. Given the following information:Which of the following command-line tools would generate this output?61. A technician is configuring a network switch to be used in a publicly accessible location.Which of the following should the technician configure on the switch to prevent unintended connections?62. Which of the following would need to be configured to ensure a device with a specific MAC address is always assigned the same IP address from DHCP?63. Which of the following DNS records works as an alias to another record?64. Which of the following TCP ports is used by the Windows OS for file sharing?65. A technician is searching for a device that is connected to the network and has the device’s physical network address.Which of the following should the technician review on the switch to locate the device’s network port?66. Which of the following service models would MOST likely be used to replace on-premises servers with a cloud solution?67. A fiber link connecting two campus networks is broken.Which of the following tools should an engineer use to detect the exact break point of the fiber link?68. Which of the following would MOST likely be used to review previous upgrades to a system?69. A network administrator is implementing OSPF on all of a company’s network devices.Which of the following will MOST likely replace all the company’s hubs?70. Wireless users are reporting intermittent internet connectivity. Connectivity is restored when the users disconnect and reconnect, utilizing the web authentication process each time. The network administrator can see the devices connected to the APs at all times.Which of the following steps will MOST likely determine the cause of the issue?71. Which of the following ports is commonly used by VoIP phones?72. A network technician needs to ensure outside users are unable to telnet into any of the servers at the datacenter.Which of the following ports should be blocked when checking firewall configuration?73. Which of the following factors should be considered when evaluating a firewall to protect a datacenter’s east-west traffic?74. Which of the following is the LARGEST MTU for a standard Ethernet frame?75. The management team needs to ensure unnecessary modifications to the corporate network are not permitted and version control is maintained.Which of the following documents would BEST support this?76. A workstation is configured with the following network details:Software on the workstation needs to send a query to the local subnet broadcast address.To which of the following addresses should the software be configured to send the query?77. A network engineer performs the following tasks to increase server bandwidth:Connects two network cables from the server to a switch stackConfigure LACP on the switchportsVerifies the correct configurations on the switch interfacesWhich of the following needs to be configured on the server?78. An engineer is configuring redundant network links between switches.Which of the following should the engineer enable to prevent network stability issues?79. A website administrator is concerned the company’s static website could be defaced by hacktivists or used as a pivot point to attack internal systems.Which of the following should a network security administrator recommend to assist with detecting these activities?80. At which of the following OSI model layers would a technician find an IP header?81. Which of the following is used to prioritize Internet usage per application and per user on the network?82. A network engineer is investigating reports of poor network performance. Upon reviewing a device configuration, the engineer finds that duplex settings are mismatched on both ends.Which of the following would be the MOST likely result of this finding?83. A technician receives feedback that some users are experiencing high amounts of jitter while using the wireless network. While troubleshooting the network, the technician uses the ping command with the IP address of the default gateway and verifies large variations in latency. The technician thinks the issue may be interference from other networks and non-802.11 devices.Which of the following tools should the technician use to troubleshoot the issue?84. A company built a new building at its headquarters location. The new building is connected to the company’s LAN via fiber-optic cable. Multiple users in the new building are unable to access the company’s intranet site via their web browser, but they are able to access internet sites.Which of the following describes how the network administrator can resolve this issue?85. A company hired a technician to find all the devices connected within a network.Which of the following software tools would BEST assist the technician in completing this task?86. An attacker is attempting to find the password to a network by inputting common words and phrases in plaintext to the password prompt.Which of the following attack types BEST describes this action?87. A client recently added 100 users who are using VMs. All users have since reported slow or unresponsive desktops. Reports show minimal network congestion, zero packet loss, and acceptable packet delay.Which of the following metrics will MOST accurately show the underlying performance issues? (Choose two.)88. Which of the following is MOST likely to generate significant East-West traffic in a datacenter?89. A technician is deploying a new switch model and would like to add it to the existing network monitoring software. The technician wants to know what metrics can be gathered from a given switch.Which of the following should the technician utilize for the switch?90. A network administrator needs to implement an HDMI over IP solution.Which of the following will the network administrator MOST likely use to ensure smooth video delivery?91. Which of the following services can provide data storage, hardware options, and scalability to a third-party company that cannot afford new devices?92. A company wants to implement a large number of WAPs throughout its building and allow users to be able to move around the building without dropping their connections.Which of the following pieces of equipment would be able to handle this requirement?93. A network technician is configuring a new firewall for a company with the necessary access requirements to be allowed through the firewall.Which of the following would normally be applied as the LAST rule in the firewall?94. Which of the following is required when connecting an endpoint device with an RJ45 port to a network device with an ST port?95. A rogue AP was found plugged in and providing Internet access to employees in the break room.Which of the following would be BEST to use to stop this from happening without physically removing the WAP?96. Allow devices to move to different switchports on the same VLANWhich of the following should the network administrator do to accomplish these requirements?97. Which of the following is MOST commonly used to address CVEs on network equipment and/or operating systems?98. A systems administrator is configuring a firewall using NAT with PAT.Which of the following would be BEST suited for the LAN interface?99. A network administrator is configuring a database server and would like to ensure the database engine is listening on a certain port.Which of the following commands should the administrator use to accomplish this goal?100. A network technician has multimode fiber optic cable available in an existing IDF.Which of the following Ethernet standards should the technician use to connect the network switch to the existing fiber?101. A technician is troubleshooting a workstation's network connectivity and wants to confirm which switchport corresponds to the wall jack the PC is using.Which of the following concepts would BEST help the technician?102. Which of the following is used to provide networking capability for VMs at Layer 2 of the OSI model?103. Given the following output:Which of the following attacks is this MOST likely an example of?104. A network technician needs to correlate security events to analyze a suspected intrusion.Which of the following should the technician use?105. Must be vendor neutralWhich of the following methods should the engineer select?106. Which of the following protocols will a security appliance that is correlating network events from multiple devices MOST likely rely on to receive event messages?107. A network administrator has been directed to present the network alerts from the past week to the company's executive staff.Which of the following will provide the BEST collection and presentation of this data?108. Which of the following is the physical security mechanism that would MOST likely be used to enter a secure site?109. A network administrator wants to improve the security of the management console on the company's switches and ensure configuration changes made can be correlated to the administrator who conformed them.Which of the following should the network administrator implement?110. Which of the following cable types would MOST likely be used to provide high-speed network connectivity between nearby buildings?111. Which of the following attacks encrypts user data and requires a proper backup implementation to recover?112. A network administrator wants to analyze attacks directed toward the company's network.Which of the following must the network administrator implement to assist in this goal?113. A network administrator wants to reduce overhead and increase efficiency on a SAN.Which of the following can be configured to achieve these goals?114. A SaaS provider has decided to leave an unpatched VM available via a public DMZ port.With which of the following concepts is this technique MOST closely associated?115. A city has hired a new employee who needs to be able to work when traveling at home and at the municipal sourcing of a neighboring city that snares services. The employee is issued a laptop, and a technician needs to train the employee on the appropriate solutions for secure access to the network from all the possible locations.On which of the following solutions would the technician MOST likely train the employee?116. A corporation has a critical system that would cause unrecoverable damage to the brand if it was taken offline.Which of the following disaster recovery solutions should the corporation implement?117. A firewall administrator is implementing a rule that directs HTTP traffic to an internal server listening on a non-standard socket.Which of the following types of rules is the administrator implementing?[Show More]
Last updated: 3 days ago
Preview1outof27pages
Add to cart
Instant download
OR
PLACE CUSTOM ORDER
![N10 008 - CompTIA Network+ Exam (117 Questions & Solutions) [Updated Latest] (1)](https://i0.wp.com/browsegrades.net/storage/N10 "N10 008 - CompTIA Network+ Exam (117 Questions & Solutions) [Updated Latest] (1)")
Add to cart
Instant download
OR
PLACE CUSTOM ORDER
Report Copyright Violation
Reviews( 0 )
Recommended For You
Communication>Exam>COMS 101 quiz 6 Liberty University answers complete solutions, All answers correct 2022/2023.(All)COMS 101 quiz 6 Liberty University answers complete solutions, All answers correct 2022/2023. COMS 101 QUIZ 6QUESTION 11.During Sammy's persuasive speech about why ghosts exist, she used a personal account of her interaction with what she called, "a friendly spirit." This is an example...By Dennis3 years agoExam$7.51 Communication>Exam>Sophia Public Speaking Unit 2 Challenge 2,100% CORRECT(All)Sophia Public Speaking Unit 2 Challenge 2,100% CORRECT Ms. Anderson teaches history at a local high school. Before one of her lessons, she overhears students debating the validity of news stories shared on social media. One story linked apples to cancer....By securegrades2 years agoExam$12Communication>Exam>Sophia Public Speaking Unit 2 Challenge 3,100% CORRECT(All)Sophia Public Speaking Unit 2 Challenge 3,100% CORRECT Caroline works for an online retail company that sells software to businesses. One day, the sales director asks her to collate information on key accounts and customer profiles before presenting her f...By securegrades2 years agoExam$13Communication>Exam>SOPHIA Visual Communications – SOPHIA.ORG UNIT 3 – MILESTONE 3 100% CORRECT(All)SOPHIA Visual Communications – SOPHIA.ORG UNIT 3 – MILESTONE 3 100% CORRECT In the field of visual communications, which term is used for one of the sources of inspiration?•Narrative•Chance•Prototype•Design refinement2A critique is also known as a...By securegrades2 years agoExam$151 Communication>Exam>HSCO 508 ; Exam 2 Liberty University answers complete solutions, Latest 2019/20.(All)HSCO 508 ; Exam 2 Liberty University answers complete solutions, Latest 2019/20. HSCO 508 Exam 2Question 1Transformational leadership is recommended for helping relationships. Which of the following is not an aspect of transformational leadership?Question 2Which of the...By Expert12 years agoExam$10Communication>Exam>COMS 101 Quiz chapter 16 Liberty University answers complete solutions.(All)COMS 101 Quiz chapter 16 Liberty University answers complete solutions. COMS 101 CHAPTER 16 Quiz•Question 13 out of 3 points_____________ is when groups members accept information and ideas without subjecting them to critical analysis•...By Dennis3 years agoExam$5Communication>Exam>COMS 101 quiz chapter 15 Liberty University answers complete solutions(All)COMS 101 quiz chapter 15 Liberty University answers complete solutions COMS 101 quiz chapter 15Question 1 (2 points)The characteristics of ceremonial speaking include__________________.Question 1 options:1) Inviting listeners to agree with you about the v...By Dennis3 years agoExam$5Communication>Exam>COMS 101 Quiz chapter 10 Liberty University Complete Answers(All)COMS 101 Quiz chapter 10 Liberty University Complete Answers COMS 101 Quiz chapter 10 Liberty University Complete AnswersQUESTION 1TrueFalseQUESTION 2a Connotation b Denotationc Demarcationd ContextQUESTION 31. Li...By Expert12 years agoExam$32 Communication>Exam>Visual Communications all milestone,100% CORRECT(All)Visual Communications all milestone,100% CORRECT Which characteristic is a component of the line element in visual design? • Length • Volume • Balance • Shape 2 Why is proximity a valuable design principle? • It can enhance viewers' perception of gr...By EVALEEN1 year agoExam$18Communication>Exam>HSCO 502 Test 3 (version 1) Liberty University answers complete solutions, Latest 2019/20.(All)HSCO 502 Test 3 (version 1) Liberty University answers complete solutions, Latest 2019/20. HSCO 502 Test 3•Question 1Video response. Review the video on, page 457 of your book; from the 3 statements select which one(s) are correct.Statement 1: The video demonstrates how MaKonn...By Expert12 years agoExam$10FAQs
What is the pass rate for CompTIA Network+ N10-008? ›
Although the changes to the main objectives for N10-008 are not too earth-shattering, it remains that 20-25% of the content is new compared to N10-007. The pass rate at about 85% only leaves you an error margin of 15% on the exam.
How many questions are on the N10-008? ›The passing score on the CompTIA Network+ N10-007 exam is 720. In terms of percentages, this works out to a score of about 77%. This means that with a total of 90 questions on the exam you will need at least 70 correct answers to pass.
How hard is it to pass the Network+ exam? ›Don't get caught thinking that the exam is easy because Network+ is a beginner-level credential, and you don't need to study. It tests foundational skills and knowledge, but it can be challenging to pass if you're not prepared.
How many times can you fail CompTIA Network+ exam? ›You can take your second attempt any time after your first exam. However, for your third and subsequent attempts, you must wait at least 14 calendar days from the last try. Candidates must pay for each exam price attempt; CompTIA does not offer any free re-tests or discounts on retakes.
How many times can you fail CompTIA A+? ›1 Answer. You can retake the CompTIA A+ certification exam if you like to because there is no restriction on the number of limits on the exam or the waiting period between exams. So, if you are not sure that you will pass the exam on 1st attempt, it's better to take the 2nd plan.
What is a passing score on Network+? ›The Network+ exam is 90-minutes long, and you could get a maximum of 90 questions on the exam. The passing score is 720, in a scale of 100 to 900.
Is N10-007 easier than N10-008? ›The N10-007 exam only requires a broad understanding of how virtualization software works, while N10-008 tests virtualization more in depth. For example, the N10-008 exam will test a candidate's knowledge on how to troubleshoot a cloud virtual machine (VM) that is not connecting to the internet.
How long should I study for the Network+ exam? ›Learn from the experts
While many respondents say they needed to study for several months, it's possible to pass the Network+ with only 6 weeks of preparation. Because the N10-008 is so similar to the N10-007, you should be able to study for — and pass! — the Network+ N10-008 in just 8 weeks.
Your CompTIA Network+ certification is good for three years from the date you pass your certification exam. Through our continuing education (CE) program, you can easily renew CompTIA Network+ and extend it for additional three-year periods.
How many questions do I need to get right on a+? ›
What is the passing rate of the CompTIA A exam+? According to CompTIA A+ passing score, in percentage terms, this equates to around 72 percent in 1001 and nearly 75 percent in 1002. This indicates that for an exam of 90 questions, you'll need at least 65 right answers in 1001 and at least 68 in 1002.
What is CompTIA Network+ salary? ›The average certified CompTIA Network+ salary is $62,000 per year in the United States. While the average freelance CompTIA Network+ salary would be $21 per hour, according to Payscale.
Is Network+ enough for a job? ›A Network+ cert holder can qualify for numerous career paths, including the position of a network support specialist, help desk technician, system engineer, and similar.
Is network or a+ harder? ›Networking+ could be harder because you need to know some connections and interpretations between different operating systems, such as Unix, Mac OS, Windows, etc. For A+, you have to focus on different topics and have more material to learn and recall in the exam.
Do you have to pay again if you fail CompTIA A+? ›Candidates must pay the exam price each time they attempt the exam. CompTIA does not offer any free re-tests or discounts on retakes.
How long should I study to pass the CompTIA A+? ›While the average time it takes to prepare for the CompTIA A+ 220-1001 is about 3 months, you can shorten that span even further by using courses that contain video explainers for skills like mobile device synchronization, which help you understand hardware and network virtualization, and give you experience in how to ...
How do I pass my CompTIA Network+ exam? ›- Tip #1: Know What Information is Covered in the Network+ Exam. ...
- Tip #2: Determine Your Strengths & Weaknesses with Practice Tests. ...
- Pro tip: Even when taking practice exams, treat them like the real one. ...
- Tip #3: Get Help to Strengthen Your Weak Spots. ...
- Tip #4: Prepare for the Exam.
Each and every CompTIA exam is proctored to prevent cheating. It doesn't matter if you take the exam in person or online through Pearson VUE – a proctor is present at all times. Additionally, anybody who takes a CompTIA certification exam must sign the CompTIA candidate agreement at the beginning of every exam.
Are CompTIA exams hard? ›Is the CompTIA A+ Exam Hard? This is a subjective question. If you come from virtually zero IT experience, then yes, you may find preparing for the CompTIA A+ exam harder than some. But that's the great thing about CompTIA exam preparation: You pick your starting point and you pick your learning style.
What percentage do you need to pass network? ›The Network+ exam is 90-minutes long, and you could get a maximum of 90 questions on the exam. The passing score is 720, in a scale of 100 to 900.
Is CompTIA Security+ harder than Network+? ›
CompTIA Security+ primarily covers concepts in cybersecurity and also requires significant study. Some IT pros may find it more difficult than CompTIA Network+, but others may find CompTIA Network+ to be harder. It all depends on an IT professional's strengths, weaknesses and experience.
Should I take N10 007 or N10 008? ›Who Should Take the Network+ N10-007 Exam? If you are already studying for the N10-007, then there is no need to switch to the N10-008. It is always better to get a certification sooner rather than later. The one drawback is that the exam will be retired by June 2022.
Does the Network+ expire? ›Your CompTIA Network+ certification is good for three years from the date you pass your certification exam. Through our continuing education (CE) program, you can easily renew CompTIA Network+ and extend it for additional three-year periods.
Is CompTIA easier than CCNA? ›CCNA Routing and Switching is a Cisco-specific networking certification. While it is still considered a beginner-level certification, most professionals consider it to be significantly more challenging than the CompTIA Network+ exam.
Do I need Network+ for cyber security? ›The Network+ certification is earned through CompTIA, and while it is not necessary for most jobs in cybersecurity, it does provide a great foundation on how computers and networks communicate with each other as well as some cybersecurity best practices.
Which CompTIA test should I take first? ›Additionally, CompTIA recommends that you have at least nine months' experience working in network support, academic training, or network administration. We also recommend that you first get the A+ certification, as it gives you a solid and robust foundation for eventual Network+ certification.
How much mark is needed to get a+ out of 200? ›For each subject the total of both plus one and plus two is out of 200. And for getting A plus in any subject, you have to score 180 out of 200.
Can I pass CompTIA A+ with no experience? ›No experience required
With CompTIA A+ you can become a career ready candidate, even with no experience.
Your exam score will be shown on your screen immediately after you've completed your exam and the exam exit survey. If you've passed the exam, you will receive a congratulatory email from CompTIA Certmetrics with instructions on how to access your record.
Can you use Notes on Network+ exam? ›During your exam session, you are not allowed to use exam-specific materials or scratch paper, erasable whiteboards or any other physical writing object like a pen, marker or pencil. However, you'll have the option to use a built-in digital whiteboard feature to do scratch work or take notes.